Issue №: 2(113)
The journal deals with the problems of vibration technologies and machines, mathematical methods of vibration process studies, information on design and technological development, presents teaching and methodological aspects of teaching in the Higher School of Applied Sciences, where vibration machines and technologies are studied.
PRACTICAL RECOMMENDATIONS REGARDING OPERATION OF THE COMPLEX OF TECHNICAL AND TECHNOLOGICAL SUPPLY OF ENERGY AND RESOURCE-SAVING PRODUCTION OF LIVESTOCK PRODUCTS AT THE ENTERPRISES OF THE AGRICULTURAL COMPLEX
Olena Solona – Candidate of Technical Sciences, Associate Professor of the Department of Labor Protection and Biotechnical Systems in Animal Production of Vinnytsia National Agrarian University (St. Soniachna, 3, Vinnytsia, Ukraine, 21008, e-mail: solona_o_v@ukr.net, https://orcid.org/ 0000-0002-4596-0449).
Yurii Polievoda – Candidate of Technical Sciences, Associate Professor of the Department of Bioengineering, Bio- and Food Technologies of Vinnytsia National Agrarian University (St. Soniachna, 3, Vinnytsia, Ukraine, 21008, e-mail: vinyura36@gmail.com, https://orcid.org/0000-0002-2485- 0611).
Igor Tverdokhlib – Candidate of Technical Sciences, Associate Professor of the Department of Labor Protection and Biotechnical Systems in Animal Production of Vinnytsia National Agrarian University (St. Soniachna, 3, Vinnytsia, Ukraine, 21008, e-mail: igor_tverdokhlib@yahoo.com, https://orcid.org/0000-0003- 1350-3232).
Vitalii Kuzemskyi – Engineer for the organization of operation and repair of Center Agro Service LLC (Nemyrivske shosse, 189, Vinnytsia, Ukraine, 21001, e-mail: kuzemskiy1995@ukr.net).
The article provides practical recommendations regarding the operation of the complex of technical and technological support for energy- and resource-saving production of animal husbandry products at enterprises of the agro-industrial complex. Recommendations are given regarding the operation of heat and mass exchange equipment in the fractional processing of perennial legumes, equipment for pressing in the technology of preparing concentrated fodder and adaptive vibration mill in the technology of preparing concentrated fodder.
Therefore, the specified recommendations determine the important role of repair services of enterprises in ensuring the production of their products, but the level of technical equipment of these units, their organization and management is currently lower than in the main production. As a result, the labor intensity of repairs increases, especially unplanned and complex ones, during which various parts of technological equipment (mechanical, electrical and electronic) are restored, repair costs increase and there is a significant overspending of various types of resources. This is a consequence of the established traditions, when the repair service of machine-building enterprises, which is related to auxiliary production, is given less attention than to the main production.
The article also considers general recommendations that are implemented during the operation of equipment for the production of livestock products at enterprises of the agro-industrial complex. The service life of the equipment largely depends on the maintenance personnel's strict compliance with the operating rules, careful handling and clean storage of machines and devices. It has been established that from 50 to 80% of all accidents occur as a result of violations of operating rules.
1. Skliar R. V., Skliar O. H., Boltianska N. I., Milko D. O., Boltianskyi B. V. (2019). Mashyny, obladnannia ta yikh vykorystannia v tvarynnytstvi. Machines, equipment and their use in animal husbandry]. Pidruchnyk. K.: Vydavnychyi dim «Kondor», 608 s. [in Ukrainian].
2. Revenko I. I., Brahinets M. V., Revenko V. I. (2009). Mashyny ta obladnannia dlia tvarynnytstva [Machinery and equipment for animal husbandry]. Pidruchnyk. K.: Kondor, 731 s. [in Ukrainian].
3. Kaletnik H. M., Yaropud V. M. Polievoda Yu. A. (2023). Chyselne modeliuvannia protsesu sushinnia aktyvnym ventyliuvanniam produktiv fraktsiinoi pererobky bobovykh trav v konvektyvnii strichkovii sushartsi. Numerical modeling of the drying process by active ventilation of products of fractional processing of legumes in a convective belt dryer. Tekhnika, enerhetyka, transport APK - [Technology, energy, transport of agricultural industry], № 2 (121). S. 5–15. [in Ukrainian].
4. Kaletnik H., Yaropud V., Polievoda Y., Solona O., Babyn I., Tverdokhlib I. (2024). Study of the process of active-ventilation drying of legume grasses’ fractional processing products. Przegląd Elektrotechniczny. Vol. 100. (2). P. 156–163. [in English].
5. Tverdokhlib I. V., Solona O. V., Polievoda Yu. A., Kholodiuk O. V. (2023). Tekhnolohiia vyrobnytstva roslynnoi bilkovo-vitaminnoi pasty. Production technology of vegetable protein-vitamin paste. Vibratsii v tekhnitsi ta tekhnolohiiakh-[Vibrations in engineering and technology]. № 3 (110). S. 85–92. [in Ukrainian].
6. Hurskyi P. V., Pertsevyi F. V., Hulyi I. S., Tishchenko L. M., Mitskevych T., Bohomolov O. V., Polevych V. V. (2001). Montazh, remont, naladka obladnannia kharchovykh vyrobnytstv. Installation, repair, adjustment of food production equipment. Praktykum. DOD KhDATOKh, 235 s. [in Ukrainian].
7. Kaletnik H. M., Yaropud V. M., Polievoda Yu. A., Solona O. V., Tverdokhlib I. V., Babyn I. A. (2023). Svidotstvo pro reiestratsiiu avtorskoho prava na tvir. Literaturnyi pysmovyi tvir naukovoho kharakteru «Tekhnolohichna blok-skhema enerhoefektyvnoho ta resursooshchadnoho protsesu vyrobnytstva vysokopozhyvnoi bilkovo-vitaminnoi pasty ta zhomu». Certificate of copyright registration for the work. Literary written work of a scientific nature «Technological block diagram of the energy-efficient and resource-saving production process of highly nutritious protein-vitamin paste and pulp». Svidotstvo № 122515. Publikatsiia vidomostei 29.12.2023. 2 s. [in Ukrainian].
8. Kaletnik H. M., Yaropud V. M., Polievoda Yu. A., Solona O. V., Tverdokhlib I. V., Babyn I. A. (2023). Svidotstvo pro reiestratsiiu avtorskoho prava na tvir. Literaturnyi pysmovyi tvir naukovoho kharakteru z eskizom «Tekhnolohichna skhema konveiernoho teplomasoobminnoho obladnannia (susharka)». Certificate of copyright registration for the work. Literary written work of a scientific nature with a sketch «Technological scheme of conveyor heat and mass exchange equipment (dryer)». Svidotstvo № 121462. Publikatsiia vidomostei 01.12.2023. 2 s. [in Ukrainian].
9. Kaletnik H. M., Yaropud V. M., Polievoda Yu. A., Solona O. V., Tverdokhlib I. V., Babyn I. A. (2023). Svidotstvo pro reiestratsiiu avtorskoho prava na tvir. Kreslennia z opysom «Skhema modeli adaptyvnoho vibromlyna iz prostorovo-tsyrkuliatsiinym rukhom zavantazhennia». Certificate of copyright registration for the work. Drawing with the description «Scheme of the model of an adaptive vibrating mill with spatial-circulation loading movement» Svidotstvo № 121572. Publikatsiia vidomostei 05.12.2023. 2 s. [in Ukrainian].
10. Kaletnik H. M., Yaropud V. M., Polievoda Yu. A., Solona O.V., Tverdokhlib I. V., Babyn I. A. (2023). Svidotstvo pro reiestratsiiu avtorskoho prava na tvir. Kreslennia z opysom «Konstruktyvna skhema konveiernoho teplomasoobminnoho obladnannia». Certificate of copyright registration for the work. Drawing with description «Constructive scheme of conveyor heat and mass exchange equipment» Svidotstvo № 121571. Publikatsiia vidomostei 05.12.2023. 2 s. [in Ukrainian].
11. Kaletnik H., Solona O., Kotov B., Stepanenko S., Shvydia V., Kalinichenko R., Tverdokhlib I., Polievoda Y. (2024). The usage of the elemental base of the vibratory mill with the spatial circulation movement of material to create drying rig. Przegląd Elektrotechniczny. Vol. 100. (3). P. 232–237. [in English].
About the journal
The journal "Vibrations in Engineering and Technologies" is included in the list of technical scientific publications of Ukraine
(Category "B", Order of the Ministry of Education and Science of Ukraine dated July 2, 2020 No. 886)
Old version of the site: http://vibrojournal.vsau.edu.ua/
The journal "Vibrations in Engineering and Technology" is indexed by the following databases and catalogs:
The certificateof massmedia State registration:kv no 16643-5115 from 30.04.2010 .
Founder of the journal: Vinnytsia National Agrarian University
The journal is devoted to highlighting current issues in engineering, mechanical engineering, and technological processes, including the study of dynamic and oscillatory phenomena in technical systems, the application of mathematical methods for process modeling and analysis, as well as the presentation of results of design-engineering and technological developments. Particular attention is given to the study of vibration processes and their application in modern technologies.
The purpose of the scientific journal “Vibrations in Engineering and Technologies” is to disseminate the results of fundamental and applied research in the field of engineering sciences aimed at developing theoretical foundations and practical approaches to the design, analysis, and improvement of machines, materials, and technological processes, including the use of vibration and oscillatory effects in various sectors of production.
The publication is focused on the formation of a modern scientific and informational environment for the effective exchange of research results, support of innovative development, and implementation of advanced technical solutions in industry, agro-industrial production, and related fields.
The journal promotes the development of interdisciplinary research, the integration of modern engineering approaches, and the enhancement of the efficiency of technological processes and technical systems, including through the rational use of vibration phenomena.
Objectives of the Scientific Journal
To achieve its stated purpose, the journal addresses the following key objectives:
dissemination of results of fundamental and applied scientific research in the fields of mechanics, mechanical engineering, technological processes, machine dynamics, and equipment, as well as in areas related to the application of vibration phenomena in engineering and technologies;
promotion of research aimed at the creation and improvement of machines, mechanisms, and technological equipment based on oscillatory and vibration processes;
support for the implementation of modern technological solutions focused on improving productivity, energy efficiency, and reliability of technical systems;
обеспечение scientific exchange of research results among research institutions, higher education establishments, and industrial enterprises;
development of interdisciplinary cooperation among researchers in the fields of mechanics, materials science, material processing technologies, and automation of technological processes;
dissemination of modern scientific achievements and advanced technologies related to the application of vibration processes in production and technical systems.
Publisher Vinnytsia National Agrarian University
In June 1994 the 2nd International Scientific and Technical Conference "Application of vibrations for technological purposes" was organized on the basis of Vinnytsia State Agricultural Institute. Leading experts in this field, noting the significant contribution to the school of Vibration Engineering under the leadership of P. S. Bernyk, proposed to create a professional all-Ukrainian scientific and technical journal "Vibration in engineering and technology..The journal was foundedat Vinnytsia State Agricultural Institute and P.S. Bernyk was elected to be the chief editor .
For all these years (since 1994) theJournal "vibration in engineering and technology" published 119 issues wherestudy of vibration effects, the creation of progressive energy saving technologies and equipment for their implementation were highlighted.
Currently Ihor Kupchuk, Candidate of Technical Sciences, Associate professor, Associate Professor of the Department of Engineering Mechanics and Technological Processes in the Agricultural Industry Faculty of Engineering and Technology Vinnytsia National Agrarian University is the chief editor of the "Vibrations in engineering and Technology"
The journal "Vibration in Engineering and technology", which has no analogues on the territory of Ukraine, is well known abroad.
