Issue №: 4(111)
The journal deals with the problems of vibration technologies and machines, mathematical methods of vibration process studies, information on design and technological development, presents teaching and methodological aspects of teaching in the Higher School of Applied Sciences, where vibration machines and technologies are studied.
DIAGNOSTIC SYSTEM FOR BRAKE WHEELS OF FREQUENCY-CONTROLLED ASYNCHRONOUS ELECTRIC DRIVES USING FPGA
Volodymyr Hrabko – Doctor of Technical Sciences professor of the Vinnytsia National Technical University (95 Khmelnytske Shosse St., Vinnytsia, 21000, Ukraine)
Dmytro Protsenko – Ph.D., Associate Professor at Vinnytsia National Technical University (95 Khmelnytske Shose Street, Vinnytsia, 21000, Ukraine).
Andrii Bartetskyi – Ph.D., senior lecturer of the Department of Power Engineering, Electrical Engineering and Electromechanics of the Vinnytsia National Agrarian University (Sonyachna St., 3, Vinnytsia, 21008, Ukraine).
Kateryna Chmykh – postgraduate student at the Vinnytsia National Agrarian University (Sonyachna St., 3, Vinnytsia, 21008, Ukraine, e-mail: catherina099@gmail.com)
...
This article presents an innovative system for diagnosing brake wheels in frequency-controlled asynchronous electric drives (FCED) using a programmable logic matrix (FPGA), which opens up new possibilities for the modern industry in detecting and analyzing potential brake wheel faults in real-time.
The primary advantage of this innovative system is the utilization of FPGA, which ensures exceptionally high signal processing speed and an instant response to any identified faults. This not only effectively detects severe issues with brake wheels but also responds to even the slightest anomalies in their operation, thereby helping prevent possible emergency situations.
Furthermore, implementing this solution significantly enhances device speed and reliability by using just one microchip, reducing power consumption and size compared to implementations using integrated circuits, consequently reducing the system's overall cost.
In conclusion, this development represents a crucial step in improving the efficiency and stability of industrial systems. It contributes to enhancing the safety and reliability of electric drives in manufacturing processes and holds great potential for implementation in industrial settings, fostering increased overall safety and productivity. Such technological advancement is a vital component of modern industry focused on achieving high-quality standards and productivity, ultimately promoting increased competitiveness and innovative development in industrial sectors.
1. Krasnyansky M. Yu. (2018). Energy Conservation. Kondor Publishing House. [Ukraine]
2. Zahіrnjak M. V., Korenkova T. V., Kalіnov A. P., Gladіr A. І., & Kovalchuk V. G. (2017). Suchasnі peretvoryuvachi chastoti v sistemah elektroprivoda. Vidavnitstvo Tochka. [Ukraine]
3. Bartetsky A. A. (2016). Mikroprotsesorny prystriy diagnostuvannya galmіvnikh kil chastotno-kerovanih asinhronnikh elektroprivodіv. Vimіryuvalna ta obchislyuvalna tehnіka v tehnologіchnikh protsesakh, (2). P.172-176. [Ukraine]
4. Sridharan K., Suresh Kumar T. V., Karthick R., Jeevitha S. Development of an Online Fault Diagnosis System for Three-Phase Inverter using FPGA. International Journal of Recent Technology and Engineering. [Poland]
5. Cabal-Yepez E., Valtierra-Rodriguez M., Romero-Troncoso R. J., Garcia-Perez A., Osornio-Rios R. A., Miranda-Vidales H., Alvarez-Salas R. (2012). FPGA-based entropy neural processor for online detection of multiple combined faults on induction motors (IJRTE). Mechanical Systems and Signal Processing, 30. P. 123-130. [Italy]
6. Nouman Z., Knobloch, Jan., Klima B. (2013). FPGA usage for power inverters diagnostics. P. 785-789. [Poland]
7. Raj A. A. B. (2017). FPGA-Based Embedded System Developer's Guide (1st ed.). [USA]
8. Ünsalan Cem., Bora Tar. (2017). Digital System Design with FPGA: Implementation Using Verilog and VHDL (1st ed.). McGraw-Hill Education.
9. Hrabko V. V. (2016). Zastosuvannia lohiko-chasovykh funktsii u zadachi diahnostuvannia halminykh kil peretvoriuvachiv chastotno-kerovanykh asynkhronnykh elektroprivodiv. Elektromekhanichni i enerhozberihaiuchi systemy, 1. P. 25-31. [Ukraine]
10. Hrabko V. V., Hrabko V. V., Bartetsky A. A. (2017). Prystriy dlia diahnostuvannia halminykh kil chastotno-kerovanykh asynkhronnykh elektroprivodiv. MPK G05B 23/02 (2006.1), 116477. [Ukraine]
About journal
The journal "Vibrations in engineering and technology" presents materials on the following issues
• Theory of processes and machines
• Mechanical Engineering and materialprocessing
• Processing and food production
The journal "Vibrations in Engineering and Technologies" is included in the list of technical scientific publications of Ukraine
(Category "B", Order of the Ministry of Education and Science of Ukraine dated July 2, 2020 No. 886)
Old version of the site: http://vibrojournal.vsau.edu.ua/
The journal "Vibrations in Engineering and Technology" is indexed by the following databases and catalogs:
The certificateof massmedia State registration:kv no 16643-5115 from 30.04.2010 .
Founder of the journal: Vinnytsia National Agrarian University
Kind of publication: journal
Type of publication : Scientific
Publication status: Domestic
Year of founding:
Periodicity: 4 times a year
Extent: 18.75 nominal printed pages
ISSN: 2306-8744 (printed version), (online)
Language of edition : (mixed languages) Ukrainian, English
The scope of the distribution and the category of readers: national, foreign, teaching staff, scientists, businessmen.
Periodical is included in the list of scientific professional editions of Ukraine approved by the Order of Ministry of Education and Sciences of Ukraine from 21.12.2015 No. 1328.
The journal "Vibrations in engineering and technology" is included in the "Catalogue of periodicals of Ukraine".
Journal subscription can be executed in each post office department.
Subscription Index is 99720.
Old version of site: http://vibrojournal.vsau.edu.ua/
In June 1994 the 2nd International Scientific and Technical Conference "Application of vibrations for technological purposes" was organized on the basis of Vinnytsia State Agricultural Institute. Leading experts in this field, noting the significant contribution to the school of Vibration Engineering under the leadership of P. S. Bernyk, proposed to create a professional all-Ukrainian scientific and technical journal "Vibration in engineering and technology..The journal was foundedat Vinnytsia State Agricultural Institute and P.S. Bernyk was elected to be the chief editor .
For all these years (since 1994) theJournal "vibration in engineering and technology" published 94 issues wherestudy of vibration effects, the creation of progressive energy saving technologies and equipment for their implementation were highlighted.
Currently Kaletnik H.M PhD , professor, academician NAAS is the chief editor of the "Vibrations in engineering and Technology"
The journal "Vibration in Engineering and technology", which has no analogues on the territory of Ukraine, is well known abroad.