Issue №: 4(91)
The journal deals with the problems of vibration technologies and machines, mathematical methods of vibration process studies, information on design and technological development, presents teaching and methodological aspects of teaching in the Higher School of Applied Sciences, where vibration machines and technologies are studied.
DEVELOPMENT OF STABLE STRUCTURAL OF VIBRATION TYPE
Veselowskaya Natalia – Doctor of Technical Sciences, Professor, Head of the Department of Machinery and Equipment for Agricultural Production of Vinnytsia National Agrarian University (Sonyachna Str., 3, Vinnytsia, Ukraine, 21008, e-mail: wnatalia@ukr.net).
Rutkevych Volodymyr – Ph.D., Senior lecturer of the Department of Machinery and Equipment for Agricultural Production of Vinnytsia National Agrarian University (Sonyachna Str., 3, Vinnytsia, Ukraine, 21008, e-mail: v_rut@ukr.net).
Yaremchuk Oleksandr – postgraduate of the Department of Machinery and Equipment for Agricultural Production of Vinnytsia National Agrarian University (Sonyachna Str., 3, Vinnytsia, Ukraine, 21008,
e-mail: sanek_2407@ukr.net).
The hydraulic vibrator is used, which is used as an autonomous unit of drive of working bodies of fruit harvesting shakers. The principle of operation of this vibrator is to create a working cylinder of the executive hydraulic cylinder pulsating pressure. Constructive features of a hydraulic vibrator allow to achieve high operational reliability, small dimensions and provide normal operation without a safety valve in the hydraulic system.
On its basis, a fruit shaker was created for the processing of trees in the continuous motion of fruit harvesting machines along the length of a row. The hydropulse drive of the vibrator carries the drive from the base machine, which is mounted on the fruit and harvesting unit.
1. Ratushna, N., & Mahmudov, I., & Kokhno, A. (2007) Metodychni pidkhody do stvorennia novoi silskokhospodarskoi tekhniky u vidpovidnosti z vymohamy rynku naukoiemnoi produktsii [Methodical approaches to the creation of new agricultural machinery in accordance with the demands of the market of science-intensive products]. MOTROL, № 9. 119-123 [in Ukrainian].
2. Iskovich-Lotoczkyi,R.D.,Obertyuh, R.R. & Sevostyanov, I.V. (2006). Procesy ta mashyny vibracijnyh ta vibroudarnyh tekhnologij [Processes and machines of vibrating and vibro-impact technologies]. Vinnycia: UNIVERSUM-Vinnycia
[in Ukrainian].
3. Babychev, A.P. & Babychev,Y.A. (2008) Osnovi vybratsyonnoi tekhnolohyi [Fundamentals of Vibration Technology]. Rostov n/D.: Yzdat. tsentr DHTU [in Russian].
4. Bernyk, P.S., Palamarchuk, I.P. & Lypovyi, I.H. (1998) Rozvytok konstruktyvnykh ta tekhnolohichnykh skhem mashyn dlia obrobky vyrobiv v umovakh vilnoho kinematychnoho zv’iazku mizh detaliamy ta robochym instrumentom [Development of design and technological schemes for processing products in conditions of a free kinematic connection between the parts of the working tool]. Vibraciyi v tekhnici ta tekhnologiyah – Vibration in engineering and technology, 2(6), 21-29 [in Ukrainian].
5. Ivanov, N., & Sharhorodskyi, S., & Rutkevych, V. (2013). Matematicheskaia model hidroprivoda blochno-portsionoho otdelitelia konservirovannykh kormov [The mathematical model of the hydraulic drive of the block-portion separator of canned feed]. MOTROL, № 5, 83-91 [in Ukrainian].
6. Rutkеvych V.S. (2017). Аdaptyvnyi hіdrаvlіchnyi pryvоd blоchnо-pоrtsіinоhо vіdоkrеmliuvаchа kоnsеrvоvаnоhо kоrmu [Adaptive hydraulic drive block-portable of canned forage block-batch separator] Vseukrainskyi naukovo-tekhnichnyi zhurnal. Tekhnika, enerhetyka, transport APK. - All-Ukrainian Scientific and Technical Journal. Engineering, power engineering, transport of agroindustrial complexes, 108-113 [in Ukraine].
7. Chubyk, R.V. & Zelinskyi, I.D. (2015) Identyfikatsiia kryteriiv dlia enerhozberihaiuchoho keruvannia vibropry-vodamy adaptyvnykh vibromashyn [Identification of criteria for energy saving control of vibration drives of adaptive vibrating machines]. Avtomatyzatsiia vyrobnychykh protsesiv u mashynobuduvanni ta pryladobuduvanni – Automation of production processes in machine building and instrument making, 49, 107-111
[in Ukrainian].
8. Voitiuk, D.G. & Baranovskyi, V.M., & Bulgakov, V.M. (2005) Silskogospodarcki mashyny Osnovy teorii i rozrakhunku: pidruchnyk. [Product innovative policy]. К.: Vyshcha osvita, 2005. –
464 p.
9. Voitiuk, D.G. & Ytsun, S.S., & Dovzhyk M.Y. (2008 )Silskogospodarcki mashyny: Osnovy teorii i rozrakhunku. [Product innovative policy]. [Agricultural Machines: The Basics of Theory and Calculation:]: navchalnyi posibnik / Sumy: VTD “Universytetska knyga”, 2008. – 543 p.
10. Shmat, S.I., & Luzan, S.V., & Kolisnyk, S.V. (2010) Tendentsii stalogo rozvytku suchasnogo silskogospodarckogo mashyno-buduvannia v Ukraini i za rubiezem [Product innovative policy]. [Trendsin Sustainable Development of Modern Agricultural Machinery in Ukraine and Abroad] . Retrieved from http://dspace.kntu.kr.ua/jspui/handle/123456789/4971. / КNTU. – 2010. [in Ukrainian].
About the journal
The journal "Vibrations in Engineering and Technologies" is included in the list of technical scientific publications of Ukraine
(Category "B", Order of the Ministry of Education and Science of Ukraine dated July 2, 2020 No. 886)
Old version of the site: http://vibrojournal.vsau.edu.ua/
The journal "Vibrations in Engineering and Technology" is indexed by the following databases and catalogs:
The certificateof massmedia State registration:kv no 16643-5115 from 30.04.2010 .
Founder of the journal: Vinnytsia National Agrarian University
The journal is devoted to highlighting current issues in engineering, mechanical engineering, and technological processes, including the study of dynamic and oscillatory phenomena in technical systems, the application of mathematical methods for process modeling and analysis, as well as the presentation of results of design-engineering and technological developments. Particular attention is given to the study of vibration processes and their application in modern technologies.
The purpose of the scientific journal “Vibrations in Engineering and Technologies” is to disseminate the results of fundamental and applied research in the field of engineering sciences aimed at developing theoretical foundations and practical approaches to the design, analysis, and improvement of machines, materials, and technological processes, including the use of vibration and oscillatory effects in various sectors of production.
The publication is focused on the formation of a modern scientific and informational environment for the effective exchange of research results, support of innovative development, and implementation of advanced technical solutions in industry, agro-industrial production, and related fields.
The journal promotes the development of interdisciplinary research, the integration of modern engineering approaches, and the enhancement of the efficiency of technological processes and technical systems, including through the rational use of vibration phenomena.
Objectives of the Scientific Journal
To achieve its stated purpose, the journal addresses the following key objectives:
dissemination of results of fundamental and applied scientific research in the fields of mechanics, mechanical engineering, technological processes, machine dynamics, and equipment, as well as in areas related to the application of vibration phenomena in engineering and technologies;
promotion of research aimed at the creation and improvement of machines, mechanisms, and technological equipment based on oscillatory and vibration processes;
support for the implementation of modern technological solutions focused on improving productivity, energy efficiency, and reliability of technical systems;
обеспечение scientific exchange of research results among research institutions, higher education establishments, and industrial enterprises;
development of interdisciplinary cooperation among researchers in the fields of mechanics, materials science, material processing technologies, and automation of technological processes;
dissemination of modern scientific achievements and advanced technologies related to the application of vibration processes in production and technical systems.
Publisher Vinnytsia National Agrarian University
In June 1994 the 2nd International Scientific and Technical Conference "Application of vibrations for technological purposes" was organized on the basis of Vinnytsia State Agricultural Institute. Leading experts in this field, noting the significant contribution to the school of Vibration Engineering under the leadership of P. S. Bernyk, proposed to create a professional all-Ukrainian scientific and technical journal "Vibration in engineering and technology..The journal was foundedat Vinnytsia State Agricultural Institute and P.S. Bernyk was elected to be the chief editor .
For all these years (since 1994) theJournal "vibration in engineering and technology" published 119 issues wherestudy of vibration effects, the creation of progressive energy saving technologies and equipment for their implementation were highlighted.
Currently Ihor Kupchuk, Candidate of Technical Sciences, Associate professor, Associate Professor of the Department of Engineering Mechanics and Technological Processes in the Agricultural Industry Faculty of Engineering and Technology Vinnytsia National Agrarian University is the chief editor of the "Vibrations in engineering and Technology"
The journal "Vibration in Engineering and technology", which has no analogues on the territory of Ukraine, is well known abroad.
