Issue №: 2(113)
The journal deals with the problems of vibration technologies and machines, mathematical methods of vibration process studies, information on design and technological development, presents teaching and methodological aspects of teaching in the Higher School of Applied Sciences, where vibration machines and technologies are studied.
DEVELOPMENT OF A COMPUTERIZED FLOUR ACCOUNTING SYSTEM AT A BAKERY ENTERPRISE USING SCADA
Voznyak Oleksandr – Сandidate of Technical Sciences, Associate Professor of the Department of Electric Power Engineering, Electrical Engineering and Electromechanics of Vinnitsa National Agrarian University (3 Soniachna St., Vinnitsa, 21008, Ukraine, email: alex.voz1966@gmail.com, https://orcid.org/0000-0002-0986-6869).
Shtuts Andrii – Сandidate of Technical Sciences, Senior Lecturer, Department of Electric Power Engineering, Electrical Engineering and Electromechanics, Vinnitsa National Agrarian University (3, Solnechna str., Vinnitsa, 21008, Ukraine, email: shtuts1989@gmail.com, https://orcid.org/0000-0002-4242-2100).
Kazimirov Oleksandr – Master of Engineering and Technology Faculty of the Vinnytsia National Agrarian University (Sonyachna St., 3, Vinnytsia, 21008, Ukraine) email: kazimirov.oleksandr@gmail.com.
Lytvynenko Nazar – Master of Engineering and Technology Faculty of the Vinnytsia National Agrarian University (Sonyachna Street, 3, Vinnytsia, 21008, Ukraine) email: nazar3lv@gmail.com
The modern stage of the development of branches of the national economy, where automatic control and control systems are actively used, is marked by the increasing penetration of microcontroller technology, methods of control and management of technological processes are constantly being improved. In general, the development of semiconductor technology and achievements in the field of automation led to the use of devices made on integrated microcircuits, which, due to high manufacturability, small size, weight and energy consumption, became very popular.
The most accurate and effective accounting of flour can be carried out with the help of an automated system based on modern software and technical tools.
The work, durability and quality of any system is determined not only by the novelty of the information it carries, but also by its operating characteristics, such as the speed of obtaining this information and its structure, the quality of all its component subsystems. All this fundamentally changes the properties of many systems, giving them new functions and opening up new possibilities for use.
A more detailed consideration of the functions of such systems shows their following advantages:
- multi-functionality of devices;
- ease of system control;
- control automation;
- the ability to perform quick mathematical calculations;
- miniaturization and efficiency of equipment;
- increase in reliability;
- the possibility of creating databases of information archives;
- reduction of system development time.
The creation of means of measurement, control and management of equipment and technological processes is characterized by the transition from the solution of separate, relatively simple tasks of automation to the creation on the basis of microprocessor circuits and other microelectronic elemental base of automation devices with software control from SCADA systems, which provide distributed automated control of technological processes of the entire enterprise as a whole.
1. Korenets Yu. M. Automation of production processes of food technologies: a textbook. Kryvyi Rih. 2023. – 557 p. [in Ukranian].
2. Shtuts A., Kolisnyk M., Vydmysh A., Voznyak O., Baraban S., Kulakov P. Improvement of Stamping by Rolling Processes of Pipe and Cylindrical Blades on Experimental Research. Actual Challenges in Energy & Mining. 2020. Vol. 844. P.168-181. (Scopus SNIP: 0.29). [in English].
3. Khorolskyi V., Korenets Yu., Ostapenko I. Development of robototechnological complex of intellectual management by bread manufacturing for technological loading territories. Technology audit and production reserves 2018 №1/3 (39)-53- 58 р. [in Ukranian].
4. Kovalyuk D.O., Guza K.M., Kovalyuk O.O. Development of a SCADA system based on web technologies. International Journal of Information Technology and Electronic Business (IJIEEB). 2018. 10(2), C. 25-32. [in Ukranian].
5. Lutska N.M., Ladanyuk A.P. Optimal and robust control systems of technological objects: monograph K.: Publishing House Lira-K. 2016-288 p. [in Ukranian].
6. Khorolskyi V.P., Korenets Yu.M., Kopaigora O.K., Zaikina D.P., Nevidin V.I. Automated control systems for the production of frozen food products. Bulletin of the Khmelnytskyi National University. Series: Technical sciences. Khmelnytskyi, 2020. No. 6 (291), pp. 199–206. [in Ukranian].
7. Vozniak O. M., Stuts A. A. Methods and means of measuring parameters of potentially unstable microwave multipoles. Vinnytsia: "TVORY" LLC. 2022. 143 p. [in Ukranian].
8. Voznyak O., Shtuts A. Investigation of the process of measurement control of the concentration of carbon dioxide. In: Traditional and innovative approaches to scientific research: theory, methodology, practice: Scientific monograph: Riga, Latvia: Baltija Publishing, 2022. P. 1-27. DOI: https://doi.org/10.30525/978-9934-26-241-8-1. [in English].
9. Stadnik M.I., Vidmysh A.A., Shtuts A.A., Kolisnyk M.A. Intelligent systems in electric power. Theory and practice: education. manual Vinnytsia National Agrarian University. Vinnytsia: "TVORY" LLC. 2020. 332 p. [in Ukranian].
10. Lysogor V.M., Shtuts A.A., Borodyanets Y.G., Kolisnyk M.A., The problem of optimization of multi-stage technological processes with man-machine control in agriculture. Technical sciences: Collection of scientific papers. VNAU. 2014. No. 1 (84). P. 125-130. [in Ukranian].
11. Wozniak O.M., Vydmysh A.A., Shtuts A.A. Study of the grapho-analytical method of determining the standard W-parameters of a quadrupole. Technology, energy, transport, agricultural industry. 2019. No. 4 (107). P. 67-78. [in Ukranian].
12. Wozniak O.M., Stuts A.A. Calculation of non-standard W-parameters of a quadrupole on a bipolar transistor. Technology, energy, transport. 2020. No. 2 (109). P. 122-128. [in Ukranian].
13. Wozniak O.M., Stuts A.A., Zamrii M.A. Development of a microprocessor controller for measuring the linear movement of moving bodies of executive mechanisms of vibrating machines. Vibrations in engineering and technology. 2020. No. 2 (101). P. 71-84. [in Ukranian].
14. Wozniak O.M., Stuts A.A., Naaugust O.P. Analysis of a comprehensive model of monitoring of power quality parameters. Technology, energy, transport, agricultural industry. 2021. No. 4 (115). P. 148-159.
[in Ukranian].
15. Wozniak O.M., Stuts A.A., Tikhonov
V. K. Study of the model of the electric power industry and methods of performing measurements of the quality of electric power. Technology, energy, transport of agricultural industry. 2022. No. 1 (116). P. 150-163.
[in Ukranian].
16. Wozniak O.M., Stuts A.A., Bulyga A.I. Study of the operation of the electromechanical system of an autonomous photovoltaic pumping station. Technology, energy, transport of agricultural industry. 2023. No. 2 (121). P. 139-148. DOI:10.37128/2520-6168-2023-2-15 http://socrates.vsau.org/repository/card.php?lang=uk&id=33779 [in Ukranian].
About the journal
The journal "Vibrations in Engineering and Technologies" is included in the list of technical scientific publications of Ukraine
(Category "B", Order of the Ministry of Education and Science of Ukraine dated July 2, 2020 No. 886)
Old version of the site: http://vibrojournal.vsau.edu.ua/
The journal "Vibrations in Engineering and Technology" is indexed by the following databases and catalogs:
The certificateof massmedia State registration:kv no 16643-5115 from 30.04.2010 .
Founder of the journal: Vinnytsia National Agrarian University
The journal is devoted to highlighting current issues in engineering, mechanical engineering, and technological processes, including the study of dynamic and oscillatory phenomena in technical systems, the application of mathematical methods for process modeling and analysis, as well as the presentation of results of design-engineering and technological developments. Particular attention is given to the study of vibration processes and their application in modern technologies.
The purpose of the scientific journal “Vibrations in Engineering and Technologies” is to disseminate the results of fundamental and applied research in the field of engineering sciences aimed at developing theoretical foundations and practical approaches to the design, analysis, and improvement of machines, materials, and technological processes, including the use of vibration and oscillatory effects in various sectors of production.
The publication is focused on the formation of a modern scientific and informational environment for the effective exchange of research results, support of innovative development, and implementation of advanced technical solutions in industry, agro-industrial production, and related fields.
The journal promotes the development of interdisciplinary research, the integration of modern engineering approaches, and the enhancement of the efficiency of technological processes and technical systems, including through the rational use of vibration phenomena.
Objectives of the Scientific Journal
To achieve its stated purpose, the journal addresses the following key objectives:
dissemination of results of fundamental and applied scientific research in the fields of mechanics, mechanical engineering, technological processes, machine dynamics, and equipment, as well as in areas related to the application of vibration phenomena in engineering and technologies;
promotion of research aimed at the creation and improvement of machines, mechanisms, and technological equipment based on oscillatory and vibration processes;
support for the implementation of modern technological solutions focused on improving productivity, energy efficiency, and reliability of technical systems;
обеспечение scientific exchange of research results among research institutions, higher education establishments, and industrial enterprises;
development of interdisciplinary cooperation among researchers in the fields of mechanics, materials science, material processing technologies, and automation of technological processes;
dissemination of modern scientific achievements and advanced technologies related to the application of vibration processes in production and technical systems.
Publisher Vinnytsia National Agrarian University
In June 1994 the 2nd International Scientific and Technical Conference "Application of vibrations for technological purposes" was organized on the basis of Vinnytsia State Agricultural Institute. Leading experts in this field, noting the significant contribution to the school of Vibration Engineering under the leadership of P. S. Bernyk, proposed to create a professional all-Ukrainian scientific and technical journal "Vibration in engineering and technology..The journal was foundedat Vinnytsia State Agricultural Institute and P.S. Bernyk was elected to be the chief editor .
For all these years (since 1994) theJournal "vibration in engineering and technology" published 119 issues wherestudy of vibration effects, the creation of progressive energy saving technologies and equipment for their implementation were highlighted.
Currently Ihor Kupchuk, Candidate of Technical Sciences, Associate professor, Associate Professor of the Department of Engineering Mechanics and Technological Processes in the Agricultural Industry Faculty of Engineering and Technology Vinnytsia National Agrarian University is the chief editor of the "Vibrations in engineering and Technology"
The journal "Vibration in Engineering and technology", which has no analogues on the territory of Ukraine, is well known abroad.
