Vibrations in engineering and technology

Shtuts Andrii – Сandidate of Technical Sciences, Senior Lecturer, Department of Electric Power Engineering, Electrical Engineering and Electromechanics, Vinnitsa National Agrarian University (3, Solnechna str., Vinnitsa, 21008, Ukraine, email: shtuts1989@gmail.com, https://orcid.org/0000-0002-4242-2100). 

The control algorithm of automated stamping by rolling of the control system of the electromechanical drive of the vertical drilling machine is relevant in modern conditions due to the rapid development of production automation technologies.

Electromechanical drives allow for high precision and productivity in processing materials by pressure, and control systems make the rolling stamping process more efficient and less expensive by optimizing speed and movement angles. SHO, in turn, allows you to create complex geometric shapes of high-quality parts.

Research in the field of development of control algorithms is important for improving the processes of manufacturing parts, increasing productivity and reducing production costs. The urgency of the work is to find optimal solutions for automated vertical drilling machines, which will improve the quality of production and the competitiveness of enterprises on the market.

This scientific article examines the control algorithm of the automated SHO control system of the electromechanical drive of a vertical drilling machine. An overview of the principles of the machine and the main stages of the SHO process is given. The proposed algorithm is based on the use of a control system that ensures accuracy and stability of the process. An analysis of the efficiency of the algorithm in practice was carried out, the advantages and disadvantages of using this control system were determined. The results of research indicate an increase in the productivity and quality of processing parts due to the implementation of this algorithm.

Automated SHO systems can be widely used in mechanical engineering for the manufacture of complex shaped parts. The reliability of these systems is a key factor that determines their efficiency and cost-effectiveness.

The development of devices for automatically changing the equipment of the stamping and rolling complex arises with the aim of increasing the efficiency and automation of production processes in industry. Roll stamping is an important technology for the production of metal parts, but the process of changing equipment (such as tools or dies) can be time and resource intensive.

The obtained results can be useful for productions using automated rolling stamping systems. They will make it possible to increase the efficiency of the production process, reduce material costs, and also ensure stable and uninterrupted production.

1. Shtuts A.A. Improvement of rolling stamping processes on the basis of modeling of the mechanics of forming blanks. Dissertation 2024 (271) p. [in Ukrainian].

2. Matvijchuk, V., Shtuts, A., Kolisnyk, M., Kupchuk, I., Derevenko, I. Investigation of the tubular and cylindrical billets stamping by rolling process with the use of computer simulation. Periodica Polytechnica Mechanical Engineering. 2022. Vol. 66, № 1. P. 51-58. [in Hungary].

3. Shtuts A., Kolisnyk M., Vydmysh A., Voznyak O., Baraban S., Kulakov P. Improvement of Stamping by Rolling Processes of Pipe and Cylindrical Blades on Experimental Research. Actual Challenges in Energy & Mining. 2020. Vol. 844. P.168-181. [in Switzerland].

4. Matviychuk V. A. Development of energy- and resource-saving technologies of procurement production. Technology, energy, transport of agricultural industry. 2022. No. 4 (119). P. 110-119.

5. Matviychuk V. A. Mikhalevich V. M. Development of processes of local deformation: Theory and practice of processing materials by pressure. JSC "Motor Sich" Monograph: 2016. P. 339-363. [in Ukrainian].

6. Mikhalevich V. M., Lebedev A. A., Dobranyuk Y.V.  Modeling of plastic deformation in a cylindrical specimen under edge compression.  Strength of Materials. Volume 43, Number 6 (2011), 

P. 591-603. [in Ukrainian].

7. Mikhalevich V. M., Dobranyuk Yu. V., Kraevsky O. V. Comparative study of models of limit plastic deformations. Herald of mechanical engineering and transport. 2018. – No. 2(8). P. 56 64. 

[in Ukrainian].

8. Sheykin S.Y., Grushko O.V., Melnichenko V.V., Studenets S.F., Rostotskyi I.Y., Iefrosinin D.V., Melnichenko Y.V. On the Contact Interaction between Hard-Alloy Deforming Broaches and a Workpiece during the Shaping of Grooves in the Holes of Tubular Products. Journal of Superhard Materials, 43 (3). 2021. pp. 222-230. [in Ukrainian].

9. Vozniak O.M., Shtuts A.A., Kolisnyk M.A. Modern systems of electric drives. Theory and practice (part 1): teaching. manual Vinnytsia National Agrarian University. Vinnytsia: "TVORY" LLC. 2021. 280 p. [in Ukrainian].

10. Vozniak O.M., Shtuts A.A. Methods and means of measuring the parameters of potentially unstable microwave multipoles. Vinnytsia: "TVORY" LLC. 2022. 143 p. [in Ukrainian].

11. Turych V.V., Rutkevich V.S. Determination of processing modes in the process of ultrasonic smoothing with a preliminary gap. Technology, energy, transport of agricultural industry. 2017. No. 4 (99). C. 104–107. [in Ukrainian].

12. Veselovska N.R., Turych V.V., Rutkevich V.S. Contact interaction of the tool with the part in the processes of surface plastic deformation with ultrasound. Vibrations in engineering and technology. 2017. No. 2 (85). C. 51–58. [in Ukrainian].